Using TFTP to Upload Files to Other Devices

You can run the tftp command to upload files from the local device to a remote server.


To upload a file, the TFTP client sends a write request to the TFTP server. After receiving data, the TFTP client sends an acknowledgment to the server.

Perform one of the following operations based on the IP address type of the server:


  • Run tftp [ -a source-ip-address | -i interface-type interface-number ] host-ip-address [ vpn-instance vpn-instance-name ] put source-filename [ destination-filename ]

    A file is uploaded using TFTP.

    The interface type specified by interface-type must be loopback.

  • Run tftp ipv6 [ -a source-ipv6–address ] tftp-server-ipv6 [ [ vpn-instance vpn-instance-name | public-net ] ] [-oi interface-type interface-number ] put source-filename [ destination-filename ]

    TFTP is used to upload files.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >