Configuring G.8275.1 on an Interface

After enabling G.8275.1 in the system view, you need to enable G.8275.1 in the interface view.


Perform the following operations on the T-BC and T-TC:


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run ptp enable

    PTP is enabled on the interface.

  4. (Optional) Run ptp notslave disable on the T-BC

    The notslave attribute of the interface is set to FALSE.

  5. (Optional) Run ptp local-priority local-priority-value

    The local priority of a PTP interface is set.

  6. (Optional) Run ptp asymmetry-correction { positive | negative } correction-value

    The asymmetric correction time for sending G.8275.1 packets on the interface is set.

  7. (Optional) Run ptp clock-step { one-step | two-step }

    The timestamping mode of the synchronization packets sending by the G.8275.1 port is set.

  8. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >