(Optional) Setting a Bandwidth Mode for an Interface

An interface's bandwidth mode (1/10/25 Gbit/s) is restricted by its hosting device's hardware. Before setting a bandwidth mode for an interface, ensure that the hardware supports this function.


When interconnecting interfaces that require the same bandwidth mode, you can run the port-mode command to set an interface's bandwidth.

In VS mode, this configuration task is supported only by the admin VS.

Perform the following steps on the router:


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The GE interface view is displayed.

  3. Set an interface's bandwidth.
    • Run port-mode { 1ge | 10ge }

      The bandwidth mode for a GE interface is configured.

    • Run port-mode { 1g | 10g | 25g}

      The bandwidth mode for a 25GE interface is configured.

  4. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >